So, this weekend I did the usual housework, eating, sleeping, watching TV etc, that people the world over do of a weekend. The other thing I did was install Debian on a mini-ITX system, and Mac OS X Leopard on a PowerMac G4 Cube.
The Cube is a little upgraded, having an 80GB hard drive, 1.5GB RAM (a Friday night upgrade after ordering 2x 512MB sticks from OWC), Airport, nVidia 6200, and a Sonnet 1.2GHz G4. Since the CPU is upgraded, Leopard will install without issues (it has a 867MHz G4 minimum requirement, although trivial to get around). I did the install using Netboot from a virtualized 10.5 server (another weekend project). I created the boot image from a 10.5.4 ISO image, which was mounted to the VM (Fusion) using the virtual optical drive device.
Boot over the network from the image, and then upgrade the installed 10.4.11 Server (this Cube was set up briefly as a server). There were, needless to say, a couple of hitches. I could not remember the original password for the admin account (I had to reset it last time, as well), so I needed to reset the password using the install disk, which did not work. So, retry to make sure I had clicked all the right buttons etc, and still no go, so a boot to single user mode to edit the local directory using dscl.
Dscl showed that the user accounts had not been imported. The home folders were there, but no account entries in the local node. So, reset the root password, reboot, login and then re-created the account. dsenableroot is a nice trick,
The other, small, issue was that the Airport card could not connect to my draft N WiFi (airport express). Not a big deal since 10/100 Ethernet is working, and I can always plugin in an older basestation (WAP) if needed.
Next trick is to get an SSD drive to saturate that slow 66mbyte ATA bus
No Comments/Pingbacks for this post yet...
Comments are not allowed from anonymous visitors.
This is all about my on going fumblings with hardware. Regular entries should provide an indication of the depths of my obsession.
|<< <||> >>|